AP#___________________________LOT#________BLOCK#________TRACT#_________________________
STREET ADDRESS __________________________________________________________________________
APPLICANT'S NAME_______________________________________ DAYTIME PHONE_________________
MAILING ADDRESS_______________________________________ HOME PHONE ____________________
OWNER'S NAME___________________________________________ DAYTIME PHONE_________________
MAILING ADDRESS_______________________________________ HOME PHONE ____________________
PLEASE NOTE: To obtain District Design Review approval, submit all documents specified herein. Locate and flag all property corners. Any pins not found must be re-set by a licensed land surveyor. Stake out building(s) footprint on site and identify trees to be removed before District Design Review.
Check off all appropriate boxes ( ) hereafter.
NOTICE: Land shall not be cleared nor graded until a building permit has been issued.
Land Use Zone: ( ) R-1 ( ) R-2 ( ) R-3 ( ) C.
Project:
( ) Single Family ( ) Two-Family ( ) Multiple Family
( ) Commercial ( ) Other _______________________________________________________________
Addition or Alteration: ( ) Existing Building ( ) Additional Building
SUBMITTAL CHECKLIST (4 sets of plans required)
Plot Plan: Drawn to scale, 1"=20' or larger.
1. Show property lines with bearings and dimensions.
2. Identify and locate adjacent streets.
3. Show topographic contours at 2' intervals if slope on building site/driveway exceeds 8% (1:12.)
4. Show building footprint and all setbacks.
5. Locate and dimension driveways and parking spaces. Identify surfacing material.
6. Show all raised porches and decks.
7. Show trees greater than 6" in diameter to be removed (outside of building/driveway footprints)
and flag on site.
8. Show outdoor lighting/sinage/tanks/antennas, etc.
9. Show cut and fill, retaining walls, drainage devices, channels proposed.
10. For manufactured homes, show route and method of move-on and placement.
|
